To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley 2711P-T7C4D8 and is the answer not in the manual?
General| Display Type | Color TFT LCD |
|---|---|
| Resolution | 800 x 480 pixels |
| Operating System | Windows CE |
| Power Supply | 24V DC |
| Series | PanelView Plus 7 |
| Touch Screen | Yes |
| Communication Ports | RS-232 |
| Ethernet | 10/100 Mbps |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Enclosure Rating | NEMA 4X (indoor use) |
Guidelines for panel mounting, clearances, and cutout dimensions for terminal installation.
Procedures for connecting DC power to PanelView Plus terminals, including specifications.
Procedures for connecting AC power to PanelView Plus terminals, including specifications.
How to enter and navigate the terminal's configuration interface.
Procedures for loading and executing HMI applications on the terminal.
Configuring the terminal's behavior upon startup or reset.
Configuring network and serial communication parameters for terminal connectivity.
Procedures for backing up and restoring the terminal system image.
Procedures for installing or replacing the logic module.
Procedures for installing or replacing communication modules.
Procedures for replacing the display module.
Essential safety guidelines for wiring terminal connections.
Information on connecting terminals via Ethernet, including pinouts and cables.
Summary of PanelView Plus 6 connections to various PLC controllers.
Introduction to the wizard for upgrading terminal firmware.
Step-by-step process for upgrading firmware using USB or SD card.
