Need help?Do you have a question about the Allen-Bradley PanelView 2711C-T6T and is the answer not in the manual?
General| Input Type | Touchscreen |
|---|---|
| Power Supply | 24V DC |
| Ethernet Speed | 10/100 Mbps |
| Display Type | Color TFT |
| Display Size | 6 inches |
| Resolution | 640 x 480 |
| Power Consumption | 15 W |
| Operating Temperature | 0°C to 50°C |
| Relative Humidity | 5% to 95% non-condensing |
| Certifications | CE |
| Touch Technology | Resistive |
Describes who should use this manual and the prerequisite knowledge.
Lists other publications and resources for PanelView Component terminals.
Information on how to obtain and perform firmware upgrades for the terminal.
Provides a general description of PanelView Component terminals and their function.
Instructions on connecting a computer to the terminal using USB or Ethernet.
Describes the PanelView Explorer design environment accessed via a web browser.
Details on connecting peripherals via USB host port, including safety precautions.
Lists available PanelView Component terminals and their catalog numbers.
Explains how to access terminal configuration via design time or runtime interface.
Details the process of configuring the terminal using a web browser.
Lists compatible operating systems, browsers, and platforms for design-time environment.
Describes how to make configuration changes directly on the terminal.
Explains the on-terminal interface for configuration on different terminal models.
Details the on-terminal interface for making configuration changes.
Describes the PanelView Explorer startup window for terminal access.
Covers setting terminal parameters via the terminal or PanelView Explorer.
Explains how to adjust terminal settings directly on the device.
Details how to adjust settings using the PanelView Explorer startup interface.
Instructions for changing the terminal's display language.
How to modify display brightness and contrast settings.
Details on enabling, disabling, and configuring screen saver modes and timeouts.
Steps to replace the default screen saver image with a custom bitmap.
Explains how to adjust keyboard key repeat rate and delay.
Procedure for calibrating the touch screen for accuracy.
Instructions on how to restart the terminal without power cycling.
How to select or change the application that runs on terminal startup.
Procedure for adjusting the terminal's current date and time settings.
Configuring Ethernet connection parameters like IP address and subnet mask.
Steps to restrict user access to configuration screens and the startup window.
How to view terminal information like firmware version and memory usage.
Overview of transferring and managing files using PanelView Explorer.
Detailed steps for exporting and importing PanelView Component applications.
Recommended procedure to check applications for errors and warnings before running.
Describes how to transfer user-defined objects (library objects) between applications.
Information on inserting an SD memory card into compatible terminals.
Details on inserting a USB flash drive into various terminal models.
Instructions and safety precautions for replacing the terminal's real-time clock battery.
Essential electrical safety requirements and wiring practices for installation.
Lists cables and their compatibility for connecting PanelView Component terminals.
Summarizes terminal connections to MicroLogix controllers and network modules.
Details the Ethernet port, connector pinout, and cable requirements.
Discusses network protocols like IGMP and SNMP relevant to communication security.
Information on the RS-232 serial port, its connector, and cable length limits.
Details on USB device and host ports, including their functions and limitations.
Step-by-step guide for installing the PanelView USB remote NDIS Network Device driver.
Procedure to connect and configure the terminal for USB communication with a computer.
Steps to take before starting a firmware upgrade, including backups.
Explains how to install firmware from a USB flash drive or SD card.
Instructions on preparing a storage device with firmware files for installation.
Steps to transfer firmware files from a storage device to the terminal.
How to access and interpret terminal system information for troubleshooting.
Lists terminal alerts, their IDs, descriptions, and corrective actions.
General troubleshooting steps and common failure indicators.
Procedure to reset the terminal to its factory default state.
Technical specifications including display, resolution, backlight, and operator input.
Details operating temperature, humidity, shock, vibration, and enclosure ratings.
Lists product certifications and compliance standards.
Instructions for importing Microsoft Windows CE fonts to the terminal.
Steps to remove a previously added font file from the terminal.
Guide to installing the PanelView Component Emulator software on a computer.
Procedure for removing the PanelView Component Emulator from your system.
Lists common error codes encountered during emulator launch and their meanings.
Introduction to the offline programming software for PanelView Component.
Overview of the design and management application for PanelView Component HMI.
Steps for installing PanelView Component DesignStation software on a computer.
Procedure for removing the PanelView Component DesignStation software.
Describes the utility for performing recovery and maintenance on non-operating terminals.
Guide to installing the PanelView Component Firmware Update Utility.
Instructions for updating the firmware image on a non-operating terminal.
Procedure to clean the terminal's file system and registry.
Troubleshooting steps for problems encountered with the firmware update utility.
Information on managing the Firmware Update Utility installation.
To Next Page