Allen-Bradley PanelView C300

Installation Instructions
PanelView Component HMI Terminals
Catalog Numbers 2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M,
2711C-T6M, 2711C-T4T, 2711C-T6C, 2711C-T6T, 2711C-T10C
About This Publication
This document provides instructions on how to install, wire, ground, and troubleshoot PanelView
Component HMI terminals. It does not provide information on how to configure or run applications on the
following devices:
2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T4T, 2711C-T6C,
2711C-T6T, 2711C-T10C
Topic Page
Environment and Enclosure 3
Catalog Number Explanation 6
About the Terminals 6
Install the Terminal 9
USB Ports 20
Choose a Power Supply 21
Remove the Power Terminal Block 22
Connect Power 23
Ground the Terminal 25
Connect Devices 25
Troubleshooting 26
Battery Replacement 27
Specifications 30
Additional Resources 33

Allen-Bradley PanelView C300 Specifications

General

Touchscreen Type	Resistive
Input Method	Touch
Power Supply	24V DC
Ethernet	No
Vibration	1 g
Shock	30 g
Display Type	TFT LCD
Communication Ports	RS-232
Operating Temperature	0°C to 50°C
Relative Humidity	5…95% noncondensing
Enclosure Rating	NEMA 4X (indoor use)
Storage Temperature	-20°C to 60°C

Summary

Environment and Enclosure

Prevent Electrostatic Discharge

Catalog Number Explanation

About the Terminals

Install the Terminal

Minimum Spacing

Specifies required clearances around the terminal for ventilation and cabling.

Panel Cutout Dimensions

Provides dimensions for creating panel cutouts for terminal installation.

Product Dimensions

PanelView Component C200 and C300 Dimensions

Provides height, width, and depth specifications for C200 and C300 terminals.

PanelView Component C400 Touch Terminals

Shows dimensions for PanelView Component C400 Touch terminals.

PanelView Component C1000 Touch Terminals

Shows dimensions for PanelView Component C1000 Touch terminals.

USB Ports

Choose a Power Supply

Connect Power

Ground the Terminal

Troubleshooting

Check for Adequate Power

Guidance on diagnosing issues related to insufficient power supply to the terminal.

Battery Replacement

Specifications

General Specifications

Technical details including isolation voltage, wire size, and enclosure ratings.

Environmental Specifications

Operating and non-operating temperature, humidity, vibration, and shock ratings.

Additional Resources