EasyManua.ls Logo

Allen-Bradley PanelView Plus 600 - User Manual

Allen-Bradley PanelView Plus 600
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Technical Data
Wiring and Grounding Guidelines
for PanelView Plus Terminals
Catalog Number 2711P
About This Publication
This document provides information on how to properly wire, ground, and apply
power to these devices:
• PanelView Plus 6 terminals (700 to 1500)
• PanelView Plus 700 to 1500 terminals supporting FactoryTalk View
Machine Edition software, version 5.1 or earlier
• PanelView Plus 400 and 600 terminals
• PanelView Plus Compact terminals (400, 600, 1000)
Throughout this publication, PanelView Plus terminals is used generically to
refer to all terminals unless specifically stated.
Topic Page
Important User Information 2
Terms and Definitions 3
Wiring and Safety Guidelines 4
Hazardous Location Advisory 4
Remove and Install the Power Terminal Block 5
PanelView Plus Nonisolated DC Terminals 7
PanelView Plus Isolated DC Terminals 12
PanelView Plus AC Terminals 17
Communication Port Isolation 21
Ethernet Cable 22
Guidelines for Powering Nonisolated DC PanelView Plus Terminals 23
Guidelines for Powering the Isolated DC PanelView Plus Terminals 26
How to Avoid Grounding Problems 27
Additional Resources 33

Table of Contents

Other manuals for Allen-Bradley PanelView Plus 600

Preview: Installation Instructions
Installation Instructions32 pages

Questions and Answers

  • M
    maryfranklinAug 5, 2025
    What to do if Allen-Bradley PanelView Plus 600 Touch terminals have a fatal hardware error?
    • J
      Jessica JohnsonAug 5, 2025
      If a fatal hardware error occurs on your Allen-Bradley Touch terminal, the suggested solution is to replace the terminal.
  • N
    Nicholas GilesAug 9, 2025
    What to do if Allen-Bradley PanelView Plus 600 Touch terminals have a fatal hardware error in display?
    • N
      nicoleallenAug 9, 2025
      If a fatal hardware error occurs in the display of your Allen-Bradley Touch terminal, the suggested solution is to replace the terminal.
  • S
    smithethanAug 13, 2025
    What to do if the Allen-Bradley Touch terminal display is dim or unreadable?
    • A
      Alyssa ScottAug 13, 2025
      If the display on your Allen-Bradley Touch terminal is dim or unreadable, first, check the brightness setting by navigating to Terminal Configuration mode, then selecting Terminal Settings > Display Intensity. If the issue persists, check the contrast setting in Terminal Configuration mode under Terminal Settings > Display Contrast. Finally, review the Screen Saver settings in Terminal Configuration mode by choosing Terminal Settings > Display > Screen Saver.
  • J
    Jennifer HarrisAug 17, 2025
    What to do if the last firmware download failed on an Allen-Bradley Touch terminal?
    • N
      Natasha HillAug 17, 2025
      If the last firmware download failed on your Allen-Bradley Touch terminal, reload the firmware using the Firmware Upgrade Wizard (FUW) utility.
  • X
    xkellyAug 22, 2025
    What to do if the Windows CE OS firmware failed or is missing on Allen-Bradley PanelView Plus 600 Touch terminals?
    • L
      lori12Aug 22, 2025
      If the Windows CE OS firmware has failed or is missing on your Allen-Bradley Touch terminal, reload the firmware using the Firmware Upgrade Wizard (FUW) utility.
  • A
    amy72Aug 26, 2025
    What to do if the EBC boot loader firmware failed or is missing on Allen-Bradley Touch terminals?
    • J
      Jack WallaceAug 26, 2025
      If the EBC boot loader firmware has failed or is missing on your Allen-Bradley Touch terminal, reload the firmware using the Firmware Upgrade Wizard (FUW) utility.
  • J
    johnnelsonAug 30, 2025
    What to do if last firmware download failed on Allen-Bradley PanelView Plus 600?
    • K
      Kim BarreraAug 30, 2025
      If the last firmware download failed on your Allen-Bradley Touch terminal, reload the firmware using the Firmware Upgrade Wizard (FUW) utility.

Summary

Important User Information

Wiring and Safety Guidelines

PanelView Plus Nonisolated DC Terminals

External Power Supply for Nonisolated DC Terminals

Requirements for powering nonisolated DC terminals using external power supplies.

Earth;Ground Connection for Nonisolated DC Terminals

Mandatory functional earth/ground connection for nonisolated DC terminals.

AC-to-DC Power Supply to Power Nonisolated DC Terminals

PanelView Plus Isolated DC Terminals

External Power Supply for Isolated DC Terminals

Earth;Ground Connection for Isolated DC Terminals

Mandatory earth/ground connection for isolated DC terminals on 700-1500 models.

AC-to-DC Power Supply to Power Isolated DC Terminals

Connect PanelView Plus DC Terminals to DC Power

PanelView Plus AC Terminals

Protective Earth Connection for AC Terminals

Protective earth connection for AC terminals on 400/600 and 700/1500 models.

Functional Earth Connection for 700 to 1500 AC Terminals

Mandatory functional earth connection for 700-1500 AC terminals.

Connect to AC Power

Communication Port Isolation

Guidelines for Powering Nonisolated DC PanelView Plus Terminals

Use the Appropriate Power Supply

Use a Single Point Ground

Connect the Power Wires Correctly

Apply Correct Input Voltage

Guidelines for Powering the Isolated DC PanelView Plus Terminals

Power the Isolated DC PanelView Plus Terminals

Connect the Power Wires Correctly

Apply Correct Input Voltage

How to Avoid Grounding Problems

Multiple Ground Connections

Explains issues arising from having multiple DC- to earth/ground connections.

Isolated DC PanelView Plus Terminals

High Current from Multiple Ground Connections

Ground Shift Problem

Ground Reference Problem

Allen-Bradley PanelView Plus 600 Specifications

General IconGeneral
Resolution320 x 240 pixels
TouchscreenAnalog resistive
BacklightLED
Operating SystemWindows CE
Power Supply24V DC
Communication PortsEthernet, RS-232
Memory64 MB RAM
Operating Temperature0°C to 50°C
Enclosure RatingNEMA 4X
ProcessorXScale processor

Related product manuals