Allen-Bradley PanelView C600 User Manual

Installation Instructions
PanelView Component HMI Terminals
Catalog Numbers 2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M,
2711C-T6M, 2711C-T4T, 2711C-T6C, 2711C-T6T, 2711C-T10C
About This Publication
This document provides instructions on how to install, wire, ground, and troubleshoot PanelView
Component HMI terminals. It does not provide information on how to configure or run applications on the
following devices:
2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T4T, 2711C-T6C,
2711C-T6T, 2711C-T10C
Topic Page
Environment and Enclosure 3
Catalog Number Explanation 6
About the Terminals 6
Install the Terminal 9
USB Ports 20
Choose a Power Supply 21
Remove the Power Terminal Block 22
Connect Power 23
Ground the Terminal 25
Connect Devices 25
Troubleshooting 26
Battery Replacement 27
Specifications 30
Additional Resources 33

Allen-Bradley PanelView C600 Specifications

General

Display Type	Color TFT LCD
Resolution	320 x 240 pixels
Power Supply	24 V DC
Operating System	Windows CE
Input Method	Touch
Operating Voltage	24 V DC
Communication Ports	Ethernet, Serial
Operating Temperature	0°C to 50°C
Enclosure Rating	NEMA 4
Display Size	5.7 inch
Touchscreen	Yes, resistive

Summary

Environment and Enclosure

North American Hazardous Location Approval

Prevent Electrostatic Discharge

Install the Terminal

Minimum Spacing

Details required clearances around the terminal for ventilation and cabling.

Panel Cutout Dimensions

Mount the C200, C300, or C600 Terminal in a Panel

Remove the C200, C300, or C600 Terminal from the Panel

Mount the C400 or C1000 Terminal in a Panel

Product Dimensions

USB Ports

Choose a Power Supply

Power Supply Criteria

Remove the Power Terminal Block

Connect Power

Power Ratings

Table detailing power consumption for different PanelView Component models.

Ground the Terminal

Connect Devices

RS-422/RS-485 Port

Troubleshooting

Check for Adequate Power

Interpret the LED Indicators at Startup

Fault Indicator States During Startup

Battery Replacement

Specifications

General Specifications

Environmental Specifications