To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley PanelView Plus 6 and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Operating System | Windows CE |
| Power Supply | 24V DC |
| Resolution | 640 x 480 pixels |
| Communication Ports | Ethernet, USB, Serial |
| Operating Temperature | 0°C to 50°C |
| Enclosure Rating | IP65 |
| Touchscreen | Analog Resistive |
Information on obtaining and installing the latest firmware for PanelView Plus 6 terminals.
Describes the communication options and physical components of PanelView Plus 6 - 400 and 600 terminals.
Details the modular components and features of PanelView Plus 6 - 700 to 1500 terminals.
Provides a breakdown of catalog numbers for PanelView Plus 6 - 400 and 600 terminals.
Details catalog number breakdown for PanelView Plus 6 - 700 to 1500 terminals.
Step-by-step instructions for securely mounting PanelView Plus 6 - 400 and 600 terminals into a panel using mounting levers.
Instructions for installing PanelView Plus 6 - 700 to 1500 terminals into a panel using mounting clips.
Procedures for removing and replacing the power terminal block on PanelView Plus 6 terminals.
Details on connecting DC power to PanelView Plus 6 terminals, including power ratings and safety precautions.
Explains how to connect AC power to PanelView Plus 6 terminals, including protective and functional earth connections.
Provides methods for restarting the terminal without removing power, using reset switches or software options.
Explains how to enter the terminal's configuration mode for settings and application management.
Covers various terminal settings not specific to applications, such as display, network, and input devices.
Instructions for loading and executing .mer applications from storage devices onto the terminal.
Details how to configure the terminal's action on startup: launch HMI, configuration mode, or desktop.
Step-by-step guide to enabling access to the Windows desktop, including password setup.
Procedure for restricting access to the Windows desktop, requiring password and challenge question.
Instructions for setting a password and challenge question for desktop access management.
Guide to clearing and resetting the desktop access password and challenge question.
Procedures for backing up and restoring the terminal's system image, including configuration data.
Step-by-step instructions for installing or replacing the logic module on PanelView Plus 6 terminals.
Procedures for installing or replacing communication modules on PanelView Plus 6 terminals.
Instructions for removing and replacing the display module on PanelView Plus 6 terminals.
Procedures for replacing the real-time clock lithium battery in PanelView Plus 6 terminals.
Covers connecting the terminal to an EtherNet/IP network using standard Ethernet connections.
Summarizes PanelView Plus 6 terminal connections to various SLC, PLC-5, MicroLogix, and Logix controllers.
Details on using the wizard to upgrade terminal firmware via storage device or network.
Step-by-step process for creating and using a firmware upgrade card from a USB drive or SD card.
Procedure for upgrading terminal firmware directly from a computer over a network connection.
Provides troubleshooting steps for issues related to the terminal failing to start, including power and indicator checks.
Steps to access maintenance mode for diagnostics and repairs, including Safe mode and terminal reset.
Procedure to restore the terminal to its original factory default state, typically after a failed firmware upgrade.
