Allen-Bradley PanelView Plus 400 User Manual

Technical Data
Wiring and Grounding Guidelines
for PanelView Plus Terminals
Catalog Number 2711P
About This Publication
This document provides information on how to properly wire, ground, and apply
power to these devices:
• PanelView Plus 6 terminals (700 to 1500)
• PanelView Plus 700 to 1500 terminals supporting FactoryTalk View
Machine Edition software, version 5.1 or earlier
• PanelView Plus 400 and 600 terminals
• PanelView Plus Compact terminals (400, 600, 1000)
Throughout this publication, PanelView Plus terminals is used generically to
refer to all terminals unless specifically stated.
Topic Page
Important User Information 2
Terms and Definitions 3
Wiring and Safety Guidelines 4
Hazardous Location Advisory 4
Remove and Install the Power Terminal Block 5
PanelView Plus Nonisolated DC Terminals 7
PanelView Plus Isolated DC Terminals 12
PanelView Plus AC Terminals 17
Communication Port Isolation 21
Ethernet Cable 22
Guidelines for Powering Nonisolated DC PanelView Plus Terminals 23
Guidelines for Powering the Isolated DC PanelView Plus Terminals 26
How to Avoid Grounding Problems 27
Additional Resources 33

Allen-Bradley PanelView Plus 400 Specifications

General

Power Supply	24V DC
Operating System	Windows CE
Mounting	Panel Mount
Display Type	Color TFT LCD
Touchscreen Type	Resistive
Communication Ports	RS-232
Operating Temperature	0°C to 50°C
Memory	64 MB RAM