92 Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Chapter 4 Windows CE Operating System
8. Click Restore.
The restore automatically includes advanced
network and display settings if this option was
checked when the backup was performed.
9. Click Yes to start the restore.
The terminal starts the restore process. This process can
take a few minutes.
When the restore has completed successfully, the terminal restarts.
d
Do not remove the USB flash drive or SD card, or
power off the terminal during the restore. This
could corrupt the firmware.
If the restore fails, you need to reset the terminal
from the maintenance menu.
Refer to Access Maintenance Operations on
page 172 for details.
To Next Page
Loading...
Need help?
General
