Need help?Do you have a question about the Allen-Bradley PowerFlex 755TR and is the answer not in the manual?
General| Model | PowerFlex 755TR |
|---|---|
| Category | Controller |
| Output Voltage | 0 to Input Voltage |
| Power Range | 0.75-250 kW (1-350 HP) |
| Control Method | Vector Control, V/Hz Control |
| Communication Options | EtherNet/IP, ControlNet, DeviceNet |
| Safety Features | Safe Torque Off (STO), Safe Speed Monitor (SSM) |
| Enclosure Type | IP20, IP30, IP54 (depending on model) |
| IP Rating | IP20, IP30, IP54 |
| Relative Humidity | 5-95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | Varies by model |
Outlines critical safety measures and warnings for installation and operation.
Details methods for configuring the IP address for the EtherNet/IP interface.
Provides steps for physically connecting the interface to the network.
Describes how to configure the drive's response to communication disruptions.
Covers configuring data exchange between controller and drive via datalinks.
Covers configuring and utilizing Automatic Device Configuration for automated setup.
Shows how to create ladder logic to read a single drive parameter.
Demonstrates creating ladder logic to write a single drive parameter.
Lists and describes all Port 0 parameters for the EtherNet/IP interface.
To Next Page
