Allen-Bradley SLC 5/05 series - Page 3

Allen-Bradley Ethernet Driver
Block Transfer Files 31
Event Log Messages
33
Unable to read data block from device. Frame received contains errors. | Block start address =
'<address>'. 33
Unable to read data block from the device. Tag deactivated. | Block start address = '<address>',
Status code = <code>, Extended status code = <code>. 33
Unable to write to address on device. Frame received contains errors. | Address = '<address>'. 34
Unable to read data block from device. | Block start address = '<address>', Status code = <code>,
Extended status code = <code>. 34
Unable to read data block from device. Tag deactivated. | Block start address = '<address>', Status
code = <code>. 35
Unable to write to address on device. | Address = '<address>', Status code = <code>, Extended
status code = <code>. 35
Unable to read data block from device. | Block start address = '<address>', Status code = <code>. 36
Unable to write to address on device. | Address = '<address>', Status code = <code>. 37
Unable to write to address on device. Packet length is out of range. | Address = '<address>', Expec-
ted packet length = <low> to <high> (bytes). 37
Unable to write to address on device. TNS is out of range. | Address = '<address>', Expected TNS
range = <low> to <high>. 37
Index
38
www. kepware.com
3