Need help?Do you have a question about the Allen-Bradley PLC-5 series and is the answer not in the manual?
General| Network Type | Ethernet, ControlNet, DeviceNet, DH+ |
|---|---|
| Protocols Supported | Ethernet/IP, ControlNet, DeviceNet, DH+ |
| Product Line | PLC-5 |
| ControlNet | Yes |
| DeviceNet | Yes |
| DH+ | Yes |
| Communication Protocol | EtherNet/IP, ControlNet, DeviceNet, DH+ |
| Compatible Processors | PLC-5 processors |
| Operating Temperature | 0°C to 60°C |
| Relative Humidity | 5% to 95% non-condensing |
Covers general, Ethernet, write optimizations, and advanced channel settings.
Details identification, operating mode, scan, timing, auto-demotion, comms, and protocol settings.
Configures I/O modules for SLC 500 series devices.
Configures redundancy settings for devices, often with plug-ins.
Covers general addressing and file types like Output, Input, and Status.
Details Binary, Timer, and Counter file addressing syntax.
Explains Control, Integer, Float, ASCII, and String file addressing.
Covers BCD, PID, Message, and Block Transfer file addressing.
Details errors like frame received, tag deactivated, and status codes during reads.
Explains errors during write operations, including frame issues and address problems.
Covers errors related to packet length and TNS range during writes.
Topics starting with A through D.
Topics starting with E through M.
Topics starting with N through S.
Topics starting with T through W.
To Next Page