To Next PageTo Next PageWhy is my Allen + Roth Fan making so much noise?
There are several reasons why your Allen + Roth Fan might be noisy: * Blades might be loose. In this case, you should tighten all blade screws. * A blade might be cracked. If this is the case, you should replace the blades. * You might be using an unapproved speed control. If so, replace it with an approved speed control device.
What to do if my Allen + Roth Fan is wobbling excessively?
Excessive wobbling in your Allen + Roth Fan can be caused by several factors: 1. Loose blades: Tighten all blade screws. 2. Incorrectly attached blade brackets: Reinstall the blade brackets. 3. Unbalanced blades: Switch a blade with one from the opposite side. 4. Insecurely mounted fan: Turn the power off, carefully loosen the canopy, and remount the fan securely. 5. Fan too close to a vaulted ceiling: Lower the fan or move it to another location.
How to fix Allen + Roth 00882 Fan blades that do not move?
If the blades on your Allen + Roth Fan aren't moving, here's what you can check: * The chain switch might be off. Try pulling the chain switch. * There might be a faulty wire connection. Turn the power off, loosen the canopy, and check all connections.
General| Brand | Allen + Roth |
|---|---|
| Model | 00882 |
| Category | Fan |
| Language | English |
Details all hardware components provided with the fan for installation.
Instructions for mounting the fan using a downrod for standard or angled ceilings.
Explains the function of the pull chain for controlling fan speed and light.
Details how to use the reverse switch to change fan rotation direction for seasonal airflow.
A list of available replacement parts with their corresponding part numbers for ordering.
