Allen + Roth Le Marche

Questions and Answers

J
Janet MurphyAug 5, 2025
Why is my Allen + Roth Le Marche wobbling excessively?
- M
  mbooneAug 6, 2025
  Excessive wobbling in your Allen + Roth fan can stem from several factors. Start by checking and tightening the set screws in the downrod support and the downrod/hanger ball assembly. Ensure the screws securing the fan blade holders to the motor hub are also tight. Verify that the blade holders are seated correctly; if not, loosen and retighten them. Confirm that the hanger bracket and ceiling outlet box are securely fastened. Lastly, try interchanging the position of fan blades to redistribute weight and improve balance.
Q
qpughAug 15, 2025
Why is my Allen + Roth Fan so noisy?
- R
  Robert LewisAug 15, 2025
  A noisy Allen + Roth fan can be due to several reasons. First, ensure the blades are properly attached to the fan. Then, check all screws in the motor housing to make sure they are snug, but not overtightened. Also, verify that the screws securing the fan blade holders to the motor hub are tight. Finally, inspect the wire connectors inside the housing to ensure they are not rattling against each other or the interior wall of the switch housing.
S
Sarah BrownAug 26, 2025
What to do if my Allen + Roth Le Marche Fan will not start?
- T
  tammysantosAug 26, 2025
  If your Allen + Roth fan isn't starting, begin by checking the main and branch circuit fuses or circuit breakers. Then, inspect the power line connections to the fan and the 9-pin connection inside the light kit to ensure they are secure. Also, make sure the reversing switch is fully engaged to one side. Remember to turn off the main power before checking any electrical connections!