FINAL ASSEMBLY INSTRUCTIONS
13
Lowes.com/allenandroth
9. Insert bulbs (L) into sockets of light kit (H).
10. Raise shade (J) to the light kit housing (G) and
secure with shade screws.
J
G
10
Shade
Screw
CAUTION: An energy-saving wattage limiter
is included in the receiver. When replacing bulbs,
ensure bulb wattage is less than 190 watts,
otherwise the item will either dim the lights to 190
watts or will automatically turn off.
H
L
9
Hardware Used
x 3Shade Screw
To Next Page
Loading...
