Allen + Roth A102002103 - Roof Structure and Panel Installation

12
ASSEMBLY INSTRUCTIONS
Attach support bar (K) to side beam 1/3
(D3/D4) and front beam 1/2 (B3/B4) using
bolts (DD), flat washers (BB) and spring
washers (EE). Tighten with wrench (Z2).
13.
Hardware Used
x 4
DD
BB
x 4
Z2
x 1
M6 x 20 Bolt
M6 Flat Washer
W6 Wrench
x 4
EE
Spring Washer
12-1.
Insert hooks (LL) into the beams (B5/D6)
as shown, then attach plastic caps (MM)
to one end of each side beams (B5/D6).
Hardware Used
x 6
Hook
LL
MM
Plastics Stopper
x 76
7x
6x
Attach beams (B5/D6) to beams (D1/
D2/D3/D4/B3/B4) using bolts (DD), flat
washers (BB) . Tighten with wrench
(Z2).
12-2.
Hardware Used
x 12
DD
BB
x 12
Z
2
x 1
M6 x 20 Bolt
M6 Wrench
M6 Flat Washer