Allen + Roth A102002103 - Page 18

18
ASSEMBLY INSTRUCTIONS
25.Insert PC panel (R3) to the lower slot
of the top beam (E2), do not fully insert.
26-2.
Insert PC panel (R2) to the middle
slot of the top beam (E2), do not fully
insert.
24.Insert PC panels (R4/R6) and PC
panels (R5/R7) to side beams (D1/
D2/D3/D4) and top side beams (E3/
E4/E5/E6).
26-1.
Lock PC panel (R2) to PC panel
(R3) and then fully insert the
PC
panel (R3) to the lower slot
of top beam (E2).
Remove the film
Remove the film
Remove the film
Remove the film