Alliance Laundry Systems Alliance Planner Programming Software - Connecting to Machine

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT9-05-72
17
Connecting to Machine
OPL Models
18. Place machine in program mode by turning key.
19. Connect cable from the laptop to the machine.
Coin Models
20. Remove coin box.
21. Flip programming switch in top right corner of box. Refer to the following illustration.
22. Connect cable from the laptop to machine.
COM212F
COM223F
1
4
7
Stop
2
5
8
0
3
6
9
Start
COM223F
COM212F
Program Switch
Cable Connection