Alliance Laundry Systems Alliance Planner Programming Software - Upgrading Washer Extractor Firmware

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
20
9-05-72
Upgrading the Washer Extractor’s Firmware
The following instructions explain how to upgrade the WE-8 firmware on HX, SX and UX cabinet
freestanding washer-extractors using the Alliance Planner software.
1. Open the Alliance Planner software on your computer.
2. In the Alliance Planner software, click Talk. Refer to Figure 1. The Communication via front
connector window appears.
CFD1006R
Figure 1
Talk