EasyManua.ls Logo

Alliance Laundry Systems AWNE9RSN115TW01 User Manual

Alliance Laundry Systems AWNE9RSN115TW01
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting
Home Topload Washers
Refer to Page 7 for Model Numbers
TLW24C_SVG2
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. 204560ENR1
April 2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems AWNE9RSN115TW01 and is the answer not in the manual?

Alliance Laundry Systems AWNE9RSN115TW01 Specifications

General IconGeneral
BrandAlliance Laundry Systems
ModelAWNE9RSN115TW01
CategoryWasher
TypeTop Load Washer
Voltage120V
Phase1
Frequency60 Hz
Amperage15 A
Control TypeElectronic
Spin Speed700 RPM
Extract Speed700 RPM
Wash ActionAgitator
Energy Star CertifiedNo
ProgramsMultiple
ConstructionStainless Steel

Summary

Safety Information

Safety Precautions and Definitions

Explains hazard terms (DANGER, WARNING, CAUTION, IMPORTANT, NOTE) and lists general safety warnings.

Troubleshooting Diagnostics

Factory Test Procedure and Reference Chart

Details on entering, exiting, and executing factory tests with a quick reference guide.

Error Codes

Pressure, Fill, Flow, Suds, Drain Errors

Lists error codes for pressure sensor, fill, flow, suds, and drain issues.

Lid Lock, Open, Unlocking, Belt, and Unbalance Errors

Lists error codes for lid lock, open, unlocking, belt, and unbalance issues.

Board, Configuration, and Voltage Errors

Covers errors related to boards, configuration, and voltage input.

Motor Performance and Connection Errors

Covers motor temperature, over current, connection, overload, and start-up issues.

Locked Rotor and Circuit Fault Errors

Details errors related to locked rotors and shunt detection circuit failures.

Component Hardware Failure Errors

Lists errors indicating hardware failures in lid lock, valves, pump, and inverter systems.

Initialization & Unbalance Switch Errors

Covers inverter, motor initialization, voltage bus, and unbalance switch errors.

Troubleshooting Flowcharts

No Hot Water Troubleshooting

Flowchart for diagnosing and resolving no hot water issues.

No Cold Water Troubleshooting

Flowchart for diagnosing and resolving no cold water issues.

No Warm Water Troubleshooting

Flowchart for diagnosing and resolving no warm water issues.

Slow Hot/Warm Fill Troubleshooting

Flowchart for diagnosing slow hot or warm water fill issues.

Related product manuals