Need help?Do you have a question about the Alliance Laundry Systems FTEE5ASP303NW10 and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | FTEE5ASP303NW10 |
| Category | Washer/Dryer |
| Dryer Type | Electric |
| Phase | 1 |
| Frequency | 60Hz |
| Depth | 28 inches |
| Color | White |
| Control Type | Electronic |
| Energy Star Certified | No |
| Amperage | 15A |
| Width | 27 inches |
| Cycle Options | Delicate, Heavy |
| Water Level Options | Automatic |
| Temperature Options | Hot, Warm, Cold |
| Spin Speed Options | Low, Medium, High |
A step-by-step procedure to test all machine features and operations for diagnostics.
Flowchart for diagnosing why the washer is not spinning.
Lists dryer error codes, their descriptions, and suggested corrective actions.
Flowchart for diagnosing a dryer motor that fails to run.
Troubleshooting for dryer stopping mid-cycle, burning smells, or thermal cycling.
Flowchart to diagnose issues when the motor runs but the dryer cylinder doesn't.
Troubleshooting steps for a dryer motor that fails to shut off.
Troubleshooting for no heat or ignition in the dryer's heating system.
Diagnosing igniter issues when gas supply is adequate.
Troubleshooting for a burner that repeatedly ignites and then shuts off.
Diagnosing why the igniter glows but the burner fails to ignite.
Steps to troubleshoot premature shut-off of the dryer's heater or burner.
Diagnosing cycling issues related to the limit thermostat.
Troubleshooting for the heater assembly or burner failing to shut off.
Flowchart for diagnosing why clothes are not drying properly.
Troubleshooting steps for a timer that fails to advance in automatic cycles.
Diagnosing excessive heat on clothes removed from the dryer.
Troubleshooting excessive chattering or vibrating noises originating from the dryer.
To Next Page
