To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems CP040PMN1 and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | CP040PMN1 |
| Category | Washer/Dryer |
| Type | Commercial Washer |
| Capacity | 40 lb |
| Voltage | 208-240 V |
| Control Type | Microprocessor |
| Cycle Options | Multiple programmable cycles |
| Phase | 3 |
| Water Consumption | Varies by cycle |
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE statements used in the manual.
Lists basic precautions to reduce the risk of fire, electric shock, serious injury, or death.
Details daily checks and conditions to avoid for safe machine operation and operator safety.
Details the procedure to access and configure the machine's initial settings.
Explains how to access and perform diagnostic tests on the PS40 control.
Describes how to check all input signals to the PS40 control.
Tests analog reference output voltage against cylinder speed.
Demonstrates how to test water level control and observe fill process.
Explains how to test the temperature sensor and view current temperature.
Details how to test the status of various machine outputs.
Guides on installing or altering existing wash programs.
Outlines the process for creating a new wash program from scratch.
Details the procedure to add or remove steps within an existing program.
Explains how to interpret alarm and fault codes for troubleshooting.
Lists and describes alarm codes related to machine performance issues.
Lists and describes fault codes indicating safety issues or malfunctions.
