Need help?Do you have a question about the ALLIANCE AWN552SN301AW01 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | AWN552SN301AW01 |
| Category | Washer |
| Type | Top Load |
| Frequency | 60 Hz |
| Amperage | 15 Amps |
| Control Type | Knob |
| Voltage | 120V |
Provides guidance on finding certified service technicians for maintenance and repairs.
Lists the washer models covered by this manual for easy reference.
Explains operational principles, customer support, and nameplate details.
Addresses clicking noises in new units and humming motors during operation.
Diagnoses issues with hot, cold, warm water supply, and improper fill levels.
Troubleshoots timer not advancing, motor not running, and agitation problems.
Addresses overheating, spin problems, stopping, binding, leaks, and vibration.
Explains error codes indicated by the 'IN USE' LED for fill and drain issues.
Guides on diagnosing fill problems using pressure switch and mixing valve diagnostics.
Addresses issues where the washer consistently overfills, potentially due to a pressure switch fault.
Outlines diagnostic steps for agitation failures and washer spin issues.
Details the process for adjusting leveling legs to ensure washer stability and prevent vibration.
Explains pressure switch adjustment and notes no belt adjustment is required.
Provides instructions for testing the motor using an ohm meter and expected resistance readings.
Details resistance testing for mixing valve solenoids at different voltages.
Outlines how to check continuity for temperature switch connections across various models.
To Next Page