Need help?Do you have a question about the ALLIANCE LWD52N*-1100 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | LWD52N*-1100 |
| Category | Washer |
| Capacity | 3.21 cu. ft. |
| Color | White |
| Construction | Steel |
Discusses DANGER, WARNING, CAUTION, IMPORTANT, and NOTE statements for user safety.
Addresses a clicking noise on new units, providing a break-in procedure for the belt.
Guides troubleshooting for a humming motor, determining if the motor or timer needs replacement.
Flowchart to diagnose and resolve issues when the washer does not fill with hot water.
Flowchart to diagnose and resolve issues when the washer does not fill with cold water.
Flowchart to diagnose why the washer's water fill level is incorrect.
Troubleshooting steps for timers that fail to advance through the cycle.
Flowchart for diagnosing why the washer will not fill, focusing on the pressure switch.
Flowchart for diagnosing why the washer will not fill, focusing on the mixing valve.
Flowchart to diagnose why agitation fails at low or high speeds.
Flowchart to diagnose why the washer will not spin at low speed.
Flowchart to diagnose why the washer will not spin at high speed.
Steps for testing the motor using an Ohm meter, including terminal connections and expected readings.
Procedure for testing mixing valve solenoids with an Ohm meter, providing resistance values.
Details how to check continuity for temperature switches with different terminal configurations.
To Next Page