EasyManua.ls Logo

ALLIANCE LWN311SP111NW22 User Manual

ALLIANCE LWN311SP111NW22
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting
www.alliancelaundry.com
Part No. 201143R6
October 2015
W001C
Home Automatic
Washers
Refer to Page 6 for Model Numbers

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ALLIANCE LWN311SP111NW22 and is the answer not in the manual?

ALLIANCE LWN311SP111NW22 Specifications

General IconGeneral
BrandALLIANCE
ModelLWN311SP111NW22
CategoryWasher
LanguageEnglish

Summary

Home Automatic Washers

Safety Information

General Troubleshooting

Water Fill Does Not Stop At Proper Level

Troubleshooting water fill levels that are too high or do not stop.

Motor Does Not Run

Flowchart for diagnosing why the motor is not running.

No Agitation

Troubleshooting steps for when the washer fails to agitate.

Slow Spin

Diagnosing issues causing the washer to spin slowly.

No Spin

Troubleshooting steps for when the washer fails to spin.

Washer Stops In Cycle; Is Intermittent

Troubleshooting intermittent stopping during wash cycles.

Washer Is Locked Up Or Binding

Diagnosing and resolving locked up or binding washer issues.

Outer Tub Does Not Empty

Troubleshooting steps for when the outer tub does not drain.

Excessive Vibration

Diagnosing and resolving excessive vibration during operation.

Water Leaking From Outer Tub

Troubleshooting water leaks originating from the outer tub.

Control Troubleshooting

Washer Will Not Fill (Pressure Switch Diagnostic)

Diagnosing fill issues using pressure switch diagnostics.

Washer Will Not Fill (Mixing Valve Diagnostic)

Diagnosing fill issues using mixing valve diagnostics.

Washer Over Fills (Pressure Switch Open)

Troubleshooting issues where the washer overfills.

No Agitation – Low and High Speed

Diagnosing agitation problems at low and high speeds.

Washer Will Not Spin – Low Speed

Troubleshooting issues where the washer fails to spin at low speed.

Test Procedures

Related product manuals