Need help?Do you have a question about the Allied Telesis AT-MWS2533AP and is the answer not in the manual?
General| Model | AT-MWS2533AP |
|---|---|
| Type | Wireless Access Point |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Mounting Options | Wall or ceiling |
| Antenna Type | Internal |
| Humidity | 10% to 90% non-condensing |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Power over Ethernet (PoE) | 802.3af PoE |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Antenna Gain | 2.4GHz: 3dBi, 5GHz: 4dBi |
| Storage Temperature | -20 to 70 °C |
| MIMO Technology | 2x2 MIMO |
Describes LAN port specifications, speed, duplex mode, and pinouts.
Explains the redundant power supply system using DC jack and PoE+.
Essential safety guidelines before installing the access point.
Procedure for mounting the access point on ceilings or walls.
How to connect the access point to the network via Ethernet cable.
Steps to connect the power adapter to the access point and power outlet.
To Next Page
