Chapter 1: Product Description
16
Features
This section lists the main features of the MWS series access points.
Hardware
Features
The hardware features for the MWS series access points are listed here:
Dual radio: 2.4 GHz and 5 GHz
IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), and IEEE
802.3ab (1000Base-T) compliance on the Ethernet port
Ceiling, Wall, or table top installation
Reset button to revert to the factory default settings
AT-MWS600AP
The features specific to the AT-MWS600AP are listed here:
One 10/100/1000Base-T Ethernet port with IEEE802.3at PoE+
2.4GHz 802.11b/g/n (2x2 MIMO) support
5GHz 802.11a/n (2x2 MIMO) support
Maximum capacity 2.4 GHz: 300Mbps
Maximum capacity 5 GHz: 300Mbps
Ceiling T-rail installation
AT-MWS1750AP
The features specific to the AT-MWS1750AP are listed here:
One 10/100/1000Base-T Ethernet port with IEEE802.3at PoE+
2.4GHz 802.11b/g/n (3x3 MIMO) support
5GHz 802.11a/n/ac (3x3 MIMO) support
Maximum capacity 2.4 GHz: 450Mbps
Maximum capacity 5 GHz: 1.3Gbps
Ceiling T-rail installation
AT-MWS2533AP
The features specific to the AT-MWS2533AP are listed here:
Two 10/100/1000Base-T Ethernet ports with IEEE802.3at PoE+
2.4GHz 802.11b/g/n (4x4 MIMO) support
5GHz 802.11a/n/ac (4x4 MIMO) support
To Next Page
Loading...
