Allied Telesis AT-TQ2403 - Figure 1: Kick Start Welcome Dialog Box; Figure 2: Kick Start Search Results Dialog Box

22 AT-TQ2403 - Management Software - User's Guide
2. Insert the AT-TQ2403 Wireless Access Point CD into the CD-ROM drive on your computer.
The Kick Start Welcome dialog box is displayed, as shown in Figure 1
Figure 1: Kick Start Welcome Dialog Box
3. Click Next to search for access points
Wait for the search to complete, or until Kick Start has found your new access points, as shown in
Figure 2.
Figure 2: Kick Start Search Results Dialog Box

Note: If no access points are found, Kick Start indic
ates this and presents some
troubleshooting information about your LAN and power connections. After you check the
hardware power and Ethernet connections, you can click Back to search again for access
points.