Allied Telesis AT-TQ2403 - Chapter 10: Maintenance and Monitoring; Interfaces; Figure 31: Status

To Next Page

To Previous Page

78 AT-TQ2403 - Management Software - User's Guide

Chapter 10: Maintenance and Monitoring

The maintenance and monitoring tasks described here all pertain to viewing and modifying settings on

specific access points; not on a cluster configuration that is automatically shared by multiple access

points. Therefore, it is important to ensure that you are accessing the Administration Web pages for the

particular access point you want to configure. For information on this, see “Navigating to Configuration

Information for a Specific AP and Managing Standalone APs”. The following maintenance and monitoring

topics are covered.

 Interfaces

 Ethernet (Wired) Settings

 Wireless Settings

 Event Logs

 Enabling or Disabling Persistence

 Log Relay Host for Kernel Messages

 Transmit/Receive Statistics

 Associated Wireless Clients

 Neighboring Access Points

Interfaces

To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status > Interfaces on the

access point you want to monitor.

Figure 31: Status - Interfaces Page

Allied Telesis AT-TQ2403 - Chapter 10: Maintenance and Monitoring; Interfaces; Figure 31: Status - Interfaces Page