AT-WCU200G User’s Guide
5
Installing the AT-WCU200G Software Driver and the
AT-WCU200G Wireless Adapter
To install the AT-WCU200G wireless adapter, you first install the software
drivers that are provided on the CD ROM. Then insert the wireless
adapter into your PC. Confirm that the software is installed by looking
for the ATI icon. See the following procedures:
❑ Installing the AT-WCU200G Software Driver on page 5
❑ Installing the AT-WCU200G Wireless Adapter on page 8
❑ Confirming Software Installation on page 11
Installing the
AT-WCU200G
Software Driver
To install the AT-WCU200G software driver on a Windows
98/ME/2000/XP Operating System, perform the following procedure.
1. Turn on your computer.
2. Insert either the AT-WCU200G/NA or AT-WCU200G/EU CD ROM into
the CD ROM drive.
If the AT-WCU200G Software Driver Window is displayed, as shown
in Figure 4, go to step 5. If it is not displayed, go to step 3.
Figure 4 AT-WCU200G Software Driver Window
To Next Page
Loading...