Installation and Safety Guide 5
613-000610 Rev B
AT-AR048 Support
Maximum DS3 packet forwarding rates are achieved only when the AT-AR048 is
installed in a Rapier 48w switch, or a Rapier 24i switch whose serial number ends
with the letter N or higher. If maximum DS3 performance is not required, you can
install the AT-AR048 in any Rapier 24i whose serial number ends with the letter J or
higher. You can find the serial number on the underside of the switch, as shown in
the following figure.
Package Contents
The following items are included with each Network Service Module (NSM).
Contact your authorised Allied Telesis distributor or reseller if any items are
damaged or missing.
■ one NSM
■ this Installation and Safety Guide
■ one warranty card
Made in Singapore
Model : AT-RP241-10
Part Number: 990-11934-10
Product Serial Number: S03K225N
Quantity With Unit of
Measure:
1 EA 7 67035 14875
5
N or higher for maximum DS3
performance
J, K, L, or M for less demanding
DS3 applications
To Next Page
Loading...
Need help?
General
