Need help?Do you have a question about the Allied Telesis Rapier i AT-RP16Fi/SC and is the answer not in the manual?
General| Form Factor | Rack-mountable |
|---|---|
| Switching Capacity | 3.2 Gbps |
| Jumbo Frame Support | Yes |
| Connector Type | SC |
| Power Supply | AC |
| MAC Address Table Size | 8K |
Explains the need for special feature licenses and passwords to activate advanced capabilities.
Warns about potential issues and data loss when manipulating FLASH memory.
Details how to connect a terminal or PC to the switch's console port for CLI access.
Specifies the communication parameters (baud rate, data bits, etc.) for terminal emulation.
Explains the process of logging into the switch via CLI using manager credentials.
Guides on configuring IP addresses for switch interfaces to enable routing and management.
Describes how to configure static and dynamic routes for network traffic forwarding.
Instructs on changing the switch's management password for security purposes.
Provides guidelines for selecting strong and secure passwords to protect access.
Explains how to enable purchased special feature licenses and passwords.
Details the requirements and steps to access the switch's web-based management interface.
Covers required browser and PC settings, including JavaScript enablement.
Provides a flowchart and procedures for establishing GUI connections based on network setup.
Step-by-step guide for configuring the switch before network deployment.
Guide for installing and connecting the switch into an existing LAN segment.
Procedure for accessing an already installed switch with a known IP address.
Details how to configure SSL for secure switch management via the GUI.
Instructs on changing the GUI password for the Manager account.
Describes how to save configuration changes made through the GUI.
Covers common issues and solutions for accessing the switch via the GUI.
Guides on troubleshooting problems related to IP addresses and DHCP.
Guides on how to load software files onto the switch.
Explains the different user account levels (USER, MANAGER, SECURITY OFFICER) and their privileges.
Describes the two operating modes and their implications for security and command access.
Guides on saving the current switch configuration to a script file for backup or reuse.
Explains how to load files onto the switch and upload files from the switch.
Guides on how to upgrade the switch's software release or patch files.
Explains how to enable or disable individual switch ports for packet reception and transmission.
Explains how to control access to ports based on MAC addresses and define actions for unknown MACs.
Guides on configuring Spanning Tree Protocol parameters like timers, priority, and port settings.
Provides steps to recover from accidentally clearing FLASH memory and restoring switch operation.
Explains how to reset forgotten passwords from a privileged account.
Covers common IP configuration issues and their solutions, including routing problems.
To Next Page
