EasyManuals Logo

Allied Telesis Rapier i AT-RP16Fi/SC User Manual

Allied Telesis Rapier i AT-RP16Fi/SC
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Getting Started with the Graphical User Interface (GUI) 43
Software Release 2.6.1
C613-02025-00 REV C
Problem The switch’s time is incorrect, even though it assigns the correct time to
devices on the LAN.
Solution The UTC offset is probably incorrect, or needs to be adjusted for the beginning
or end of summer time. To correct this, select Configuration > System > Time
and enter the correct offset.
Loading Software
Problem You have attempted to load a new release file onto the switch, but the load
has failed and you cannot access the switch through the GUI.
Solution 1. Access the switch’s CLI (see “Connecting a Terminal or PC” on page 14).
If the switch has been switched off or has rebooted since you attempted to
load the release file, it will boot up with the default installation. This
contains the commands you require to load a file.
Log into the switch using the manager account and password.
2. Download the release file to the switch. See “Example: Upgrade to a New
Software Release Using TFTP” on page 59 for an example.

Table of Contents

Other manuals for Allied Telesis Rapier i AT-RP16Fi/SC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis Rapier i AT-RP16Fi/SC and is the answer not in the manual?

Allied Telesis Rapier i AT-RP16Fi/SC Specifications

General IconGeneral
BrandAllied Telesis
ModelRapier i AT-RP16Fi/SC
CategorySwitch
LanguageEnglish

Related product manuals