11
Camera power
Operating the camera beyond the specified range damages the camera.
Cameras are powered using the FPC connector at a maximum input of 5.5 VDC,
using a limited power source (LPS), according to IEC 62368-1: 2014 (Second
Edition) with maximum 1.5 A. The camera is not intended to be connected to a
DC distribution network.
GPIOs
To avoid damage to the camera, keep maximum input voltage less than 5.5 VDC
and maximum current less than 12 mA per output. The maximum length for I/O
cables must not exceed 30 m.
Technical details
• FPC Cables and Embedded Boards for CSI-2 Cameras
requirements specification
• Accessories documentation
•User guide
See https://www.alliedvision.com
> Support > Technical Documentation > Alvium CSI-2 cameras.
To Next Page
Loading...
