Allied Construction Products, LLC www.alliedcp.com
SOM576701_14jan
14
6.0 Operation – [cont’d]
Keep the oil circulating in the carrier during
pauses in work to prevent it from falling below a
temperature that is too cold for normal operation.
Specify hydraulic oils with viscosity suitable for
the climate conditions. In general, the hydraulic
oil that was originally specified for the machine by
the carrier manufacturer can be used with the
Allied equipment.
Use oil viscosity based on the expected air
temperature range during the period between oil
changes.
Optimum oil viscosity for the breaker @ operating
temperature is 60 – 30cSt. Allowable oil viscosity
range 1000 – 20cSt.
To Next Page
Loading...