WITH PROGNOSTICS + WITH OIL LEVEL SENSOR
5
Oil Life Monitor
The status of the oil life is displayed as a percentage
(OIL LIFE 100%) until fluid is due for a change.
Filter Life Monitor
The status of filter life is displayed as OIL FILTERS OK
and alerts when filters are due for a change with REPLACE FILTERS.
Transmission Health Monitor (not available for TC10)
The status of transmission health is displayed as OK or LO.
Accessing Prognostics
When you are alerted via the WRENCH ICON on the shift selector that service
is due, you can check the status by toggling through the shift selector
display as follows. Be sure to park the vehicle on a level surface, shift to
N (NEUTRAL) and apply the parking brake before accessing prognostics
through the shift selector.
Oil Life Monitor
For a pushbutton shift selector,
simultaneously press the UP and DOWN
arrows two times.
For a bump lever shift selector,
press the DIAGNOSTICS button two times.
Filter Life Monitor
For a pushbutton shift selector,
simultaneously press the UP and DOWN
arrows three times.
For a bump lever shift selector, press
the DIAGNOSTICS button three times.
Transmission Health Monitor
For a pushbutton shift selector,
simultaneously press the UP and DOWN
arrows four times.
For a bump lever shift selector, press
the DIAGNOSTICS button four times.
The percentage of the
fluid life remaining is
displayed. New fluid is
shown as OIL LIFE 100%.
Acceptable filter life status
is shown as FILTERS OK,
unacceptable filter life status
is shown as REPLACE FILTERS.
When TRANS HEALTH OK is
shown, clutch maintenance
is not required. When TRANS
HEALTH LO is displayed, clutch
maintenance is required.