Allmand 185 CFM - Page 30

Not for
Reproduction
30 ALLMAND.COM
4. Dispose of used coolant according to local, state
and/or federal regulations.
A
B
C
Change Oil Separator
Contact your authorized dealer.
Change Nylon Tubes
Contact your authorized dealer.
Change Fuel Hose
Contact your authorized dealer.
Change Pressure Regulator
Contact your authorized dealer.
Change Unloader O-Rings
For part numbers, see Replacement Parts.
When reassembling, apply sufficient grease to O-ring
Slot/O-ring and sliding surface.
Use CALTEX MULTIFAK EP1 grease or equivalent.
Grease of poor quality will deteriorate the material.
Supply grease to O-ring (A, B, C, D) after replacement.
A
B
D
C
A
Check Rubber Hose
Contact your authorized dealer.
Change Radiator Hoses
Contact your authorized dealer.
Check / Replace Auto-Relief Valve /
Vacuum Relief Valve Parts
For part numbers, see Replacement Parts.
When reassembling, apply sufficient grease to O-ring
Slot/O-ring and sliding surface.
Use CALTEX MULTIFAK EP1 grease or equivalent.
Grease of poor quality will deteriorate the material.
After disassembling and cleaning auto-relief valve,
check O-rings (E, F, G). Replace if worn or damaged.
E
F
G
G
F
E