Allmand 185 CFM - Features and Controls

Not for
Reproduction
9
Features and Controls
Read this Operator’s Manual and safety rules before operating your towable compressor.
Compare the illustrations with your towable compressor, to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
A - Pressure Control Valve — Keeps receiver tank
pressure higher than 56 PSI (4 BAR) in tank.
B - Oil Separator — Separates oil mist mixed in
compressed air.
C - Pressure Regulator — Regulates intake air
volume.
D - Compressor Air Filter — Filters compressor air.
E - Fuel Tank — Stores diesel fuel oil.
F - Fuel -pre-filter — Filters impurities in fuel oil and
separates water from fuel.
G - Engine Air Filter — Filters engine air.
H - Engine Oil Filler Port — Location for adding
engine oil to engine.
I - Fuel Filter — Filters impurities from fuel.
J - Air bleeding electromagnetic pump — Filters
impurities from fuel.
K - Bypass Valve — Maintains compressor oil
temperature
L - Oil Cooler — Cools compressor oil circulating in
system
M - Oil Cooler Drain Valve — Drains compressor oil
from oil cooler and oil lines
N - Engine Oil Drain Valve — Drains engine oil.
O - Engine Oil Filter — Filters engine oil.
P - Engine Oil Level Gauge — Indicates engine oil
level.
Q - Compressor Oil Level Gauge — Indicates
compressor oil level.
R - Fuel Tank Drain Valve — Drains condensate
accumulated in fuel tank.
S - Separator Receiver Tank Drain Valve — Drains
condensate from separator-receiver tank.
T - Compressor Oil Filler Port — Location for adding
compressor oil.
A B C D E F G H I J K L
T
S R Q P O N M