ALLUXITY Pre Two - How to Change Input and Output

Page 15
How to change Input and Output
How to change Input and Output
You change the input and output different places:
Pre-amp One
The 5 different inputs are all located on the Main Interface and on the right side. Here you have:
•RCA1
•RCA2
•XLR1
•XLR2
•XLR3
These are input 1-5.
To change the input, simply press gently on the button on the screen so it will turn green.
The green color shows that this is the active input.
To change the output, press the Setup button (the mechanical wheel), and select between
the XLR and the RCA output.
Power-amp One
The power amplifier only uses inputs and only haves 2 different inputs, the XLR and the RCA.
To change the input, simply press gently on the button until it turns green.