Allwinner A10 User Manual

Firmware Upgrade Method of all All Winner A10 Tablet PC – www.w2comp.com
Pick up your best Android Tablet on W2COMP.com –
www.w2comp.com
Thank you for your purchase on W2COMP! Here we would like to teach you how to upgrade the firmware of
Android Tablet PC based on All Winner A10 CPU.
Updated on 30-May-2012, the models of All Winner A10 we have:
1. Ainol Novo7 Aurora
2. Ainol Novo7 Advanced II
3. Ampe A90
4. Ampe A10
5. Eken A90
6. Eken T01
7. Ployer Momo9
Precautions:
A power failure during the firmware writing operation may disable the tablet PC.
* Use a fully charged Battery or dedicated AC Adapter for the firmware update.
* Do not shut off the power during the firmware writing operation.
Please download the Livesuitpack, Livesuit USB driver and the firmware which you need from our website:
http://www.w2comp.com/news.asp?menuid=11248&supmenuid=11146
1. Please unzip “Livesuitpack_version_1.09.rar”, password is: w2comp.com , as below:
2. Open the unzipped file “ Livesuitpack_version_1.09”. You will see “ livesuitpack_version_1.09_20111101”,
3. Copy it to another empty file:

Allwinner A10 Specifications

General

GPU	Mali-400 MP
Wi-Fi	802.11 b/g/n
CPU	1 GHz ARM Cortex-A8
Storage	4 GB - 16 GB flash
Operating System	Android
Video Encoding	1080p
USB	USB 2.0
Battery	Varies by device

Summary

Precautions for Firmware Upgrade

Power Failure Warning

Warning about potential tablet disabling due to power failure during firmware writing.

Battery and Power Requirements

Requirement to use a fully charged battery or dedicated AC adapter for firmware updates.

Avoid Power Interruption

Instruction not to shut off power during the firmware writing operation.

Download Required Files

Website for Downloads

Link to the website for downloading Livesuitpack, USB driver, and firmware.

Unzip Livesuitpack

Unzipping Instructions

Instructions to unzip Livesuitpack_version_1.09.rar with a specified password.

Open and Identify Files

Locate Livesuitpack File

Guide to opening the unzipped folder and identifying the main Livesuitpack executable.

Select Language

Choose English Language

Instruction to select 'English' when prompted for language selection.

Tool Installation and Driver Check

Tool Installation Confirmation

Display of files after language selection, indicating tool installation.

USB Driver Verification

How to confirm the USB driver is found by double-clicking the LiveSuit icon.

Select Firmware Image

Click SelectImg

Instruction to click 'SelectImg' to choose the firmware file for the tablet.

Connect Tablet and Initiate Upgrade

Connect USB Cable

Connect one end of the USB cable to the computer.

Press and Hold Volume Button

Press and hold the volume button on the tablet until upgrade starts.

Connect Tablet to PC

Connect the other end of the USB cable to the tablet while holding the volume button.

Format Device Prompt

Press power button multiple times to trigger format prompt, choose 'Yes' to start upgrade.

Upgrade Completion

Disconnect Device

Instruction to safely disconnect the tablet from the computer after the upgrade is complete.