SHANGHAI ALLYNAV TECHNOLOGY CO., LTD
3. Communication mode includes Bluetooth Communication, TCP client
Communication, etc. The way supported by each instrument manufacturer may be
different. The basic Bluetooth mode is basically supported by all manufacturers.
4. Click on the equipment parameters, enter the Bluetooth search and selection,
as shown in Figure 3.1-4, and click on the equipment to choose the equipment needed
to connect. The list of common equipment will display the 5 devices with the most
Communication frequency, to facilitate users to quickly find the connected equipment.
5. After the equipment is successfully connected, click "debug" to view the
communication data between the software and the equipment. As shown in Figure
3.1-4, the equipment debugging commands can be sent to the equipment to
investigate the problems related to the equipment positioning through the
communication data.
Figure 3.1-1 Figure 3.1-2 Figure 3.1-3
To Next Page
Loading...