SHANGHAI ALLYNAV TECHNOLOGY CO., LTD
Figure 3.3-7 Figure 3.3-8
3.4 Point Stakeout
Click [Survey] -> [Point Stakeout] to enter the interface of the setting out point
library, as shown in Figure 3.4-1. Point Stakeout refers to the location of the point at
the field site if the point coordinates are known.In the sample point will show the
sample point and put point, click the sample point to remove, view the details and
sample, to sample point is part of the coordinate point library, add Import data Export
data operation consistent with the coordinate point library, did not actually delete
points in the point library, also can be selected in the coordinate point (all points in
the coordinate point library).After selecting the point for demout, enter the point
demout interface as shown in Figure 3.4-2.
The layout of the point sample interface is similar to the point survey and is
somewhat different. However, the southeast and northwest deviation value from the
target is shown in the status information bar.The compass compass is not in the top
right corner of the drawing area but is currently positioned together.Below the
drawing area, in addition to the survey setting function, there are the nearest point,
the top bit, and the next bit.
In addition to the survey setting, information display setting, and function menu
To Next Page
Loading...
Need help?
General