SHANGHAI ALLYNAV TECHNOLOGY CO., LTD
left side of the drawing area is the display of the function collection, these function
menu can also display the required functions here according to the needs of the user
to quickly operate some functions, the bottom right corner of the area shows the
drawing scale, the icon above the scale is the trigger survey acquisition function
button, the button can be moved according to the user's use habits, in a more
convenient place to operate.Click the key to start the survey function, as shown in
Figure 3.3-2.Below the drawing area are the survey attribute naming and encoding
input locations, as well as the antenna height setting and the entrance to the
coordinate point library.
Figure 3.3-1 Figure 3.3-2
Click the setting icon to enter the survey setting interface, as shown in
Figure 3.3-3.Here, we set the collection restrictions for survey and collection, such as
solution state, HRMS, VRMS, PDOP, difference delay, etc. Users set the restrictions
according to the accuracy requirements of the job.Setting the number of smoothing
points is to average multiple sites to indicate accuracy.In addition, you can also set the
default roll call and the default encoding.The information display setting is to set the
display content of the status information bar, and the user can display it according to
his own key information setting, as shown in FIG. 3.3-4.Function menu setting is that
the user displays the common function Settings to the left menu bar according to the
needs of their own homework process, so that the user can quickly and easily call
To Next Page
Loading...
Need help?
General