Alma FLEXICOMPT AUTONOME+ Operating Guide

This document sketches out the main menus (please refer to operating manual MU 7033 EN for further information).
Document available for sotware 434v2.00
FORM DOC 124 A
OPERATING GUIDE
FLEXICOMPT AUTONOME+
GU 7033 EN I
www.alma.alma.fr
USING THE BUTTONS
Come back to the previous stage
- Choose the menu option
- Display the delivery information
- Validate the displayed option
- Validate a fault
Light the display during 10 seconds
Reset the volume and record the last
measurement data
SuPErVi
Unloading control
Visualization (Last measurement, Totalisers, Memorizing)
Supervisor Menu (Calibration, Season, Parameters, Maintenance,
OPTION transfer of parameters)
MEtErin
ViSuALi
NB1: If it’s used with Adblue, the FLEXICOMPT AUTONOME+ must be rinsed with water after use
NB2: Since the CTD+ key is not ATEX, it must be used outside potentially explosive area
NB3: Do not plug the USB cable during data transfer.

Alma FLEXICOMPT AUTONOME+ Specifications

General

Brand	Alma
Model	FLEXICOMPT AUTONOME+
Category	Measuring Instruments
Language	English