CHARGING THE DRONE BATTERY PACK
1.) Open the battery cover on the bottom of the drone and disconnect the battery
pack from the drone.
2.) Remove the battery pack from the drone.
3.) Connect the battery pack cable to the wall charger cable.
4.) Plug the wall charger into an outlet. The LED light on the wall charger will be
RED while charging.
5.) When the battery is fully charged the LED light on the wall charger will turn
GREEN.
- DO NOT OVERCHARGE THE BATTERY PACK.
- ONLY CHARGE THE BATTERY PACK WITH THE INCLUDED WALL
CHARGER.
- DO NOT CHARGE THE BATTERY PACK OVER NIGHT.
- DO NOT CHARGE THE BATTERY PACK UNSUPERVISED.
- DO NOT DAMAGE OR PIERCE THE BATTERY PACK.
- DO NOT CHARGE A DAMAGED BATTERY PACK.
- KEEP THE BATTERY PACK AWAY FROM HIGH TEMPERATURES.
7.4V 1500mAh Li-Poly
Rechargeable Battery Pack
Wall Charger
The drone battery pack can be recharged with the included wall
charger.
Full charge will take approximately 180 minutes.
WARNING:
To Next Page
Loading...