EasyManua.ls Logo

Alphatron ALPHA BNWAS User Manual

Alphatron ALPHA BNWAS
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ALPHA BNWAS
Bridge Navigational Watch Alarm System
Installation & Operation manual
Question and Answer IconNeed help?

Do you have a question about the Alphatron ALPHA BNWAS and is the answer not in the manual?

Alphatron ALPHA BNWAS Specifications

General IconGeneral
BrandAlphatron
ModelALPHA BNWAS
CategorySecurity System
LanguageEnglish

Summary

General Safety Warnings

Equipment Modification

Do not modify the equipment without written permission to avoid voiding the warranty.

Installation Requirements

Must be installed by certified companies according to manual methods to maintain warranty.

Serviceability Limitations

System components are not operator serviceable; repairs require trained and certified personnel.

1 Introduction

2 ALPHA BNWAS Hardware

Control Unit Mounting and Dimensions

Specifies the physical dimensions, cut-out size, and mounting requirements for the control unit.

Optional Equipment Overview

Details the reset unit, officers selector switch, cabin alarm unit, and alarm unit as optional components.

3 Operation

Basic Operation and Timers

Covers using push buttons, key switch, and adjusting time settings for the watch alarm.

Alarm Sequences and Response

Details pre-alarm, continuous alarms, officer/crew notification, and emergency call functions.

4 Technical Specifications

5 VDR Communication Interface

NMEA Communication Parameters

Specifies the protocol, interface, baud rate, data bits, parity, and stop bits for VDR communication.

NMEA Data Message Format

Details the structure of the NMEA message sent to the VDR, including character descriptions.

6 Technical Drawings

Example Connection Diagram

Wiring for Alarm and Cabin Units

Shows specific connections for alarm units and cabin units, including 'selector switch'.

Unit Dimensions and Cut-Outs

Control Unit Dimensions

Provides dimensions and cut-out for the main control unit (3115.0004).

Optional Unit Dimensions

Provides dimensions and cut-out for optional alarm units (3115.0018).

Optional Unit Dimensions and Cut-Outs

Cabin Alarm Unit Dimensions

Provides dimensions and cut-out for the cabin alarm unit (3115.0006).

Reset Unit Dimensions

Provides dimensions and cut-out for the reset unit (3115.0006).