EasyManua.ls Logo

AlpicAir ACMI-28VRDC1A - User Manual

Default Icon
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for choosing Air Conditioners, please read this owner’s manual carefully before
operation and retain it for future reference.
Multi Variable Air Conditioners
Cassette Type Indoor Unit
Models:
ACMI-28VRDC1A
ACMI-36VRDC1A
ACMI-45VRDC1A
ACMI-50VRDC1A
ACMI-56VRDC1A
ACMI-63VRDC1A
ACMI-71VRDC1A
ACMI-80VRDC1A
ACMI-90VRDC1A
ACMI-100VRDC1A
ACMI-112VRDC1A
ACMI-125VRDC1A
ACMI-140VRDC1A
ACMI-160VRDC1A
Owner's Manual

Table of Contents

Questions and Answers

  • C
    Christopher WilliamsAug 5, 2025
    Why is my AlpicAir ACMI-28VRDC1A Air Conditioner not cooling properly?
    • M
      Michele VanceAug 5, 2025
      Several factors can cause a poor cooling effect. The filter might be dirty, requiring cleaning or replacement. There could be too much heat in the room due to many people or other sources; try to reduce this heat load. Ensure doors and windows are closed to prevent warm air from entering. Check for blockages in the indoor unit's inlet and outlet and clear them. The temperature setting may be too high, so lower it. Finally, insufficient refrigerant, possibly due to leaks, can also cause this issue; in this case, check for leaks and recharge the system if needed.
  • B
    Bryan OrrAug 11, 2025
    What to do if my AlpicAir Air Conditioner won't start?
    • J
      Jenna MichaelAug 11, 2025
      If your AlpicAir Air Conditioner doesn't start, first check the power supply connection to ensure it's properly connected. Then, inspect the circuit breaker, as it may have tripped due to a leakage of electricity. Also, test the input voltage to ensure it is not too low. If these steps don't resolve the issue, it could be a defect of the main PC-board, in which case you should contact an authorized service center.
  • N
    Nathan GrahamAug 17, 2025
    Why is my AlpicAir ACMI-28VRDC1A not heating well?
    • D
      Daniel MurrayAug 17, 2025
      A poor heating effect can be caused by several things. Check if the filter is dirty and clean or replace it. Make sure doors and windows are closed. The temperature setting may be too low, so increase it. Also, check for refrigerant leaks and recharge if necessary, as insufficient refrigerant can cause this issue.
  • B
    brownshannonAug 23, 2025
    What to do if my AlpicAir ACMI-28VRDC1A stops running after a while?
    • E
      ericadamsAug 23, 2025
      If your AlpicAir Air Conditioner stops after running for a while, check whether the inlet or outlet of the outdoor (ODU) or indoor (IDU) unit are blocked by any obstacle. If there are any obstructions, remove them.
  • T
    Teresa Young PhDAug 29, 2025
    Why doesn't the indoor fan start during heating in my AlpicAir ACMI-28VRDC1A Air Conditioner?
    • S
      susansmithAug 30, 2025
      The indoor unit (IDU) fan might not start immediately during heating to prevent cool air from being delivered until the heat exchange becomes hot; wait until the heat exchange becomes hot. Also, during defrosting, the IDU fan may stop because the system switches to cooling mode to prevent cool air from being delivered; allow the system to complete the defrost cycle.

Summary

Safety Precautions

Product Introduction

Names of Key Components

Identifies and lists the main components of the indoor unit with numerical labels.

Rated Working Condition

Specifies the operating temperature ranges for cooling and heating for indoor and outdoor units.

Unit Functions

Details the functions available and compatibility with different controllers (wired/remote).

Preparations for Installation

Standard Fittings

Lists and describes the standard accessories provided for unit installation.

Installation Position Selection

Provides guidelines for choosing the optimal location for installing the indoor unit.

Requirements of communication wire selection

Outlines specifications and requirements for selecting communication wiring.

Wiring Requirement

Details the specifications for power cords and air switch capacity.

Installation Instructions

Indoor unit installation

Guides on the process of installing the indoor unit, including ceiling opening and suspension.

Refrigerant Pipe Connection

Instructions for correctly connecting the refrigerant pipes, including tightening torque.

Drainage Pipe Installation and Drainage System Testing

Details on installing drainage pipes and performing tests to ensure proper water drainage.

Panel installation

Procedures for attaching and securing the decorative panel to the indoor unit.

Wired controller installation

Instructions for installing the optional wired controller accessory.

Wiring Work

Connection of Wire and Patch Board Terminal

Explains how to connect wires to terminal boards and patch panels securely.

Power Cord Connection

Guides on connecting the main power cord to the unit for operation.

Connection of Communication Wire between Indoor Unit and Outdoor Unit(or indoor unit)

Details on wiring the communication cables between indoor and outdoor units.

Connection of Communication Wire for Wired Controller

Instructions for connecting communication wires to the wired controller.

Illuminate for Connection of Wired Controller and Indoor Units Network

Explains how to connect wired controllers to manage multiple indoor units.

Routine Maintenance

Cleaning of Filter

Provides steps for removing, cleaning, and drying the air filters.

Maintenance before the Seasonal Use

Lists checks to perform before operating the unit for a new season.

Maintenance after the Seasonal Use

Outlines procedures for long-term storage and end-of-season maintenance.

Table of Error Codes for Indoor Unit

Troubleshooting

AlpicAir ACMI-28VRDC1A Specifications

General IconGeneral
BrandAlpicAir
ModelACMI-28VRDC1A
CategoryAir Conditioner
LanguageEnglish

Related product manuals