Alpine 7280LS - Page 15

7 OPERATION
Local/Distance Switch Operation
You may select local or distance mode during SEEK tuning. When it is in the local mode
(Distance (DX) indicator © is off), it allows you to tune in strong signal stations only
(stations C, F, H and L as shown below). When it is in the distance mode (Distance (DX)
indicator is on), weak and strong signal stations (stations from A through M) will be tuned
in.
Once a station is tuned in by SEEK in local mode, the mode will automatically switch to
distance mode for optimum reception.
lad daha
Station Frequencies
Signal Strength
NOTE: DX (Local/Distance) Switch @0 functions only in SEEK tuning.
15