Need help?Do you have a question about the Alpine A and is the answer not in the manual?
General| Brand | Alpine |
|---|---|
| Category | Cassette Player |
| Model | A |
| Power Supply | 12V DC |
| Channels | 2 |
Details the three-head system, Dolby C-type NR, and bias fine control for superior audio performance.
Highlights features like the 4-digit memory counter, auto play/rewind, auto stop, and sensitive optical peak meter for user-friendly operation.
Instructions for setting up and performing playback, including tape selection and Dolby NR settings.
Details on how to record from a stereo amplifier/receiver, including initial setup and level adjustments.
Provides a detailed explanation of the Dolby C-type noise reduction system, its principles, and benefits.
Explains how to use memory switches for automatic tape stopping, repeat playback, and section erasing.
Explains the advantages of the three-head configuration for optimal frequency response and recording monitoring.
Details the Dolby NR Type C system's noise reduction capabilities and its impact on dynamic range.
Step-by-step instructions for playing cassette tapes, including tape selection and Dolby NR settings.
Guides on setting up and performing recording from a stereo amplifier or receiver.
Addresses common problems like REC switch not operating, weak high frequencies, and no sound during playback or recording.
Lists symptoms and causes for issues like REC switch failure, weak high frequencies, and no sound.
Covers troubleshooting for tape speed variations, excessive noise, hum, and auto-stop activation before tape end.
To Next Page
