Alpine 7390M - IC Terminal Descriptions (continued); 15590 W07: IC601 Terminals

7390M |
@15590W07, 15522W04 : IC601
=
1 RUN-DET Take-up reel detector input terminal for GR mechanism.
| 3 [PLaysor | o | Head base forward/back-ward selector output terminal for GR mechanism,
| 4[rrsor | o | Play “fast-forward (rewind) selector output terminal for GR Mechanism.
Ps [eIECTSOL | 0 | est solenoid acwating output for GR mechaniem ———SSSSCS~S~*Y
PuOTORCT | oO | Motor running direction selector ouput terminal for GR mechani =|
Por [reser | 1 [Reset signal input termina Cd
ae a Crystal/Ceramic connection terminal for system clock oscillation,
X2
in case of external clock, input to X1 and input opposite phase to X2,
| 10 [LEVELOF | oO | Music sensor gain selector output terminal.
P11 | MOTORFAST | 0 | Motor rotons! number selector output terminal for GR mechanim
[12 TomoToR | 0 _| Motor rotaion//sop selector output terminal for GR mechanism =
Pig ER te On| Audio signal FWD/REV selector output terminal for GR mechanism.
14 Pack insertion detector input terminal for GR mechanism,
15
Metal tape detector input terminal.
Tape non-recorded portion detector input terminal.
Preset indicator LED lighting selector terminal.
18 [LEDON
20 [pTsce__|
zi [soKez |
zz | CHANGER _|
z= [poe |
24 [oo
25 [KEYES
26
Loudness selection output terminal.
s lal
= Cc
4 is)
=
—
NO
DTS chip enable signal output terminal.
SDK buzzer signal output terminal.
5952/7390 audio signal selector output terminal.
Dolby-C selector output terminal.
Dolby-B selector output terminal,
Key path serial data selector output terminal.
Ground (GND) potential terminal.
Ny ~“
<
n n
Accessory power detector input terminal,
9 | DISPLY-DT I
REMO-CON I
31 BAND2
32
3
5952 display data input terminal,
Remote control data input terminal.
to)
©
Destination selector input terminal,
w > Z =
>
Qa
a
With/without SDK selector input terminal.
@
n 1o)
al
With/without auto memory selector input teminal. (But for this model, connect to GND)
AUTO-ME
AUTO-ME
With/without auto memory selector input teminal, (But for this model, connect to GND)
With/without auto memory selector input teminal, (But for this mode!, connect to GND)
AUTO-ME
VOL-PUSHKEY
KEY-IN Key data input terminal,
MUTE ae DTS mute signal input terminal.
STRT mae DTS communication start signal input teminal,
at Sts. eT DTS status signal input terminal,
CMD | oO | DTS command data output terminal.
43. }SCK | DTS synchronous clock signal input terminal,
BATT | 1 | Battery power detector input terminal,
Eject key input terminal.
W/WIi® W W ODINIO oO ff
— 26 —