Alpine 7516MM - Unit Features and Controls; Controls and Indicators Overview

ERROR INDICATION FOR CD SHUTTLE FEATURES
(7516M/7516MM model only)
INDICATION
CAUSE
SOLUTION
Disc-change malfunction.
Consult your Alpine dealer.
Disc-change malfunction.
Press the magazine eject
button and pull out the
Magazine. Check for error
indication. !nsert the
magazine again. lf the
magazine can not be pulled
out, consult your Alpine
dealer.
Magazine ejection
impossible.
Press the magazine eject
button. If the magazine does
not eject, consult your Alpine
dealer.
Disc is in player mechanism.
Press the magazine eject
button, and insert an empty
magazine.
High Temperature.
Will disappear when the
temperature returns to
operation range.
Misconnection or
disconnection of CD Shuttle.
|
Check connection between
CD Shuttle and control unit.
FULL FRONT DIN™ CHASSIS
CD SHUTTLE CONTROL
SCC TAPE HEAD™
The SCC tape head provides an exceptionally flat frequency response.
Q.R.B. (QUICK RELEASE BRACKET)
Alpine’s exclusive Q.R.B. design allows for easy removal of the 7516M/7516MM,
while still maintaining memory. The 7516M/7516MM may then be carried with the
owner for theft prevention.
A. MEMO (AUTO MEMORY)
In the Auto Memory mode, the 6 strongest FM, MW or LW stations will automatically
be stored in preset memory.
D.A.P. (DIRECT ACCESS PRESET)
D.A.P. allows the storage of FM, MW and LW presets on the same band, eliminating
the need to press the TUNER/BAND button. Up to 6 FM, and MW/LW stations can be
mixed in the D.A.P. Band.
PRESET SCAN (INTELLIGENT PRESET SCAN)
FULL LOGIC DECK WITH TRUE FAST FORWARD AND REWIND
RADIO MONITOR
Allows listening to the FM and MW/LW Tuner section while the tape is in the fast
forward or rewind mode.
M.I.X. (RANDOM PLAY-CD only)
REPEAT (TAPE, CD)
When activated while you are listening to your favorite music selection, the music will
play over and over.
SCAN (TAPE, CD)
It scans quickly and plays the beginning of each music selection for ten seconds.
When you locate the selection of your choice, press the button again to play it till the
end.
BLANK SKIP
By fast advancing the tape, it skips more-than-15-second-long blanks between music
selections or at the end of the tape.
DOLBY* B NOISE REDUCTION
MUSIC SENSOR
Allows you to access the beginning of the current or next musical! selection on the
tape using Fast Forward and Fast Reverse.
LOUDNESS CONTROL AND INDICATOR
LITETOUCH™ 30-STATION PRESETS
6-FM1; 6-FM2; 6-MW; 6-LW; 6-D.A.P.
SDK FUNCTION
SELECTABLE FADER
This system allows you to select either the pre-amp or power amp fader mode. The
pre-amp fader controls the signal level in the pre-amp stage for two amplifiers, and the
power amp fader balances the front and rear speaker sound in a four-speaker system
using the unit's internal power.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. “DOLBY” and the double-D symbol ( D0) are trademarks of Dolby
Laboratories Licensing Corporation.
CONTROLS AND INDICATOR
(7516M/7516MM model only)
am Geo IIa =~
FMW2 = — wo
avo GEG (Ll t,o pscp
ad HLS.OXM.LK.STHORPT ALL SEER A.MERO
METAL|BI-LEVEL 25W+25W OGCAN SS,
Pw. i) ()
FMWI2 | |
R.MONI () ©) (G)